This ultrasonic cleaning service is for master cylinders, calipers, reed valve blocks, and any other items that might benefit from ultrasonic cleaning. This is the cheapest ultrasonic cleaning service on the web, but we do not skimp on quality!
Ultrasonic cleaning is the best way to thoroughly clean various items inside and out. Whether that item sat a long time, building up dirt and grime, or whether it collected that grime during use, ultrasonic cleaning can often restore the items to
This service cleans your item in our ultrasonic machine using safe, non caustic, environmentally safe solutions that will leave your items clean as a whistle. Gunk, grime, and deposits will be removed to near perfection. This process if far superior to many traditional cleaning methods.
About Our Process
Before ultrasonic cleaning your items are dipped in an environmentally friendly cleaning solution that is used to loosen and remove large debris. This dipping process lasts for 24 hours, but may be longer if needed. After the dipping stages, the item is then placed into the ultrasonic tank where they get their final cleaning. This cleaning process heats the items to over 150 degrees Fahrenheit and runs for a minimum of 30 minutes. The process is repeated until the carbs reach a satisfactory level.
Pricing is per item. 1 item = $25, 2 items = $50, etc.
$25 is the base rate for one item, including its component parts. If the item is received and work greater than the base rate is needed, you will be contacted with a quote for that work. If you wish to receive a quote before hand, please contact me.
The tank can accomodate items as large as 5″ x 5″ x 10″. Larger items may work, but it is not recommended.
How to Send Them
It is ideal that the item has been disassembled to its smallest component pieces. Using a zip-lock bag is ideal for storing and shipping the various components.
More On The Ultrasonic Process (source:Wikipedia)
“Ultrasonic cleaning uses cavitation bubbles induced by high frequency pressure (sound) waves to agitate a liquid. The agitation produces high forces on contaminants adhering to substrates like metals, plastics, glass, rubber, and ceramics. This action also penetrates blind holes, cracks, and recesses. The intention is to thoroughly remove all traces of contamination tightly adhering or embedded onto solid surfaces.”
Our process uses a cleaning solution that is safe on rubber, plastics, brass, aluminum and more. However, gaskets, o-rings, and other items may get damaged during ultrasonic cleaning. We are NOT responsible for damage to parts. It is strongly recommended that you break down your items into their individual parts before hand. Do NOT send items that you believe might be damaged by ultrasonic cleaning.